Laser Cutting Service
Our Laser is 100W, and does an excellent job. Our kits are less expensive than some others as the more powerful laser can cut a lot quicker, with more accuracy.
Send us your plan, either paper or electronic, and we will generate all the parts in Autocad and cut the kit for you. If you want a model scaled up or down we can do that as well. The cost for scaling up or down will be a little bit higher, but not excessive. We are aiming to keep the cost as low as possible. If you can send us a DXF file the cost of cutting the kit is significantly reduced.
Plywood thicknesses we have in stock are.
Basswood 5 ply, 3mm,
Birch 3 ply 4mm and 5 ply 6mm
Birch Aircraft ply 0.4mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2mm, 2.5mm, 3mm
All laser cut kits are short kits and only include all formers and ribs, no sheeting, spars, cowls, canopies, wheel pants, fittings, fuel tank or wing tubes unless otherwise stated
Waco YMF-5 90″
50cc 1/4 scale $445
Includes full size plans, wing jigs, wing tubes and reg post
Culver Dart 59″ W/S
.40 glow power $85
CAC CA-15
1/6th scale 72″ W/S (Airborne plans) 45-50cc $220
P40 Kittyhawk 94″
W/S 50cc
FW-190
Electric 60″ W/S $120 plus plans
Mosquito 81″
2 x .46 power Brian Taylor $225 including reg post and plans
Transformer
Airborne plan 609 All ribs and formers $50
CLASSIC UGLY STICK 86″ W/S
1.60 to 2.20 or 30cc to 45cc gas engine $275 TWO PIECE WING Includes plans, fuse sides, formers, all ribs with building tabs, plates, wing tube and sockets, main spars, curved sections of vertical fin and rudder, false leading edges, carbon fiber undercarriage. Only balsa needed is 4 x 1.5, 8 x 2.5, 3 x 3, 1 x 6.5, 2 x 9.5 and 1 x 12.5. Cost for balsa sheets is $175 I can also supply as a one piece wing, saving the cost of the wing tube, but it is a big wing
Hawker Hurricane
1/5 92″ W/S 36cc-50cc Short kit $295 Roy Vaillencourt design. Fibreglass parts available from Vailly Aviation
Spitfire 100″
55-60cc Nick Zirolli plans.
Short kit $270
Wing spars $43
Fibreglass cowl, canopy, retracts, tailwheel, air scoops available from Nick Zirolli
Big Stik 100
122″ 3.120m W/S 80-120cc. $527
Flying weight 12.5Kg. Plug in wing and tail. Awesome fun fly for large engines Kit includes plans, fuse sides, all ribs and formers, false leading edges for wing and tailplane, wing and tailplane jigs, spars, wing & tail tubes, carbon fiber undercarriage, curved sections for fin & rudder, wing bolts. It can be fitted with a single servo per side for ailerons, or 2 per side at your request with split ailerons. Elevator servos inside the tailplane.
Telemaster Senior 95″
$150 Includes plans. Including plans and all the balsa and spars to complete the model is $250
Broggini Stardust Special 840sq.in
Short kit $145
Plans $40
Redrawn in CAD to original specs. Laser cut lite ply formers instead of original construction. Much easier to build acurately
Building Material
We are now manufacturing spar material from Australian Hoop Pine. Hoop Pine is a very good alternative to Spruce as it is light and very strong, similar to Spruce. Sizes are available in imperial and metric, plus custom sizes, so they suit all plans, old and new. We have had mailing tubes manufactured to our specs so we can send the spars by mail
Waco YMF-5 90″
50cc 1/4 scale $445
Includes full size plans, wing jigs, wing tubes and reg post
Culver Dart 59″ W/S
.40 glow power $85
CAC CA-15
1/6th scale 72″ W/S (Airborne plans) 45-50cc $220
P40 Kittyhawk 94″
W/S 50cc
FW-190
Electric 60″ W/S $120 plus plans
Mosquito 81″
2 x .46 power Brian Taylor $225 including reg post and plans
Transformer
Airborne plan 609 All ribs and formers $50
CLASSIC UGLY STICK 86″ W/S
1.60 to 2.20 or 30cc to 45cc gas engine $275 TWO PIECE WING Includes plans, fuse sides, formers, all ribs with building tabs, plates, wing tube and sockets, main spars, curved sections of vertical fin and rudder, false leading edges, carbon fiber undercarriage. Only balsa needed is 4 x 1.5, 8 x 2.5, 3 x 3, 1 x 6.5, 2 x 9.5 and 1 x 12.5. Cost for balsa sheets is $175 I can also supply as a one piece wing, saving the cost of the wing tube, but it is a big wing
Hawker Hurricane
1/5 92″ W/S 36cc-50cc Short kit $295 Roy Vaillencourt design. Fibreglass parts available from Vailly Aviation
Spitfire 100″
55-60cc Nick Zirolli plans.
Short kit $270
Wing spars $43
Fibreglass cowl, canopy, retracts, tailwheel, air scoops available from Nick Zirolli
Big Stik 100
122″ 3.120m W/S 80-120cc. $527
Flying weight 12.5Kg. Plug in wing and tail. Awesome fun fly for large engines Kit includes plans, fuse sides, all ribs and formers, false leading edges for wing and tailplane, wing and tailplane jigs, spars, wing & tail tubes, carbon fiber undercarriage, curved sections for fin & rudder, wing bolts. It can be fitted with a single servo per side for ailerons, or 2 per side at your request with split ailerons. Elevator servos inside the tailplane.
Telemaster Senior 95″
$150 Includes plans. Including plans and all the balsa and spars to complete the model is $250
Broggini Stardust Special 840sq.in
Short kit $145
Plans $40
Redrawn in CAD to original specs. Laser cut lite ply formers instead of original construction. Much easier to build acurately
Building Material
We are now manufacturing spar material from Australian Hoop Pine. Hoop Pine is a very good alternative to Spruce as it is light and very strong, similar to Spruce. Sizes are available in imperial and metric, plus custom sizes, so they suit all plans, old and new. We have had mailing tubes manufactured to our specs so we can send the spars by mail